PRO-UPS ®  Universal Pile Entry System

No more I- or J-Tubes needed !

Vos Prodect Innovations has developed a direct entry system, the Pro-UPS. The Pro-UPS is installed in a pre-cut hole in the monopile. Installation of the UPS is simple; the UPS has to be pulled in with a messenger wire, once in place it is locked by tightening two bolts.
When the UPS is installed it acts like a direct monopile entry system for an easy cable pull-in. The Pro-UPS provides a bellmouth on the outside and a bend stiffener on the inside of the monopile.

The cable with the CPS protection string is pulled in to the UPS and the protectors will be blocked inside the UPS. When the cable is secured by a hang-off, the cable is well protected. A big advantage of this method is that the cable can also be retrieved easily for maintenance or repair without removing the UPS.
The pull-in of a Pro-UPS is shown in the picture below.

The picture below shows the internal closure of the UPS inside the Mono-Pile.


For more information, please send your request to; info@vos-prodect.com